Cambium PMP 100 Series

PMP 100 series systems provide wireless broadband connectivity voice, video and data last mile access.With a broad array of Access Points and Subscriber Modules, these systems can be configured to meet the current and future needs of network operators.

PMP 100 Series product throughput:

• AP 105 – Cost effective AP for low density locations
• PMP 110 – From 1 to 7 Mbps
• PMP 120 – 7 Mbps
• PMP 130 – 14 Mbps

Cambium PMP 320

The PMP 320 is optimized for long range, fixed, outdoor applications and does not need costly base stations ASN gateways required to support mobility.

• FCC certified to work in BOTH the upper AND lower 25 MHz of the 3.65 GHz band
• Serving up to 200 subscribers per sector with a typical aggregate bandwidth
  of up to 45 Mbps (10 MHz channel)

Cambium PMP 400

The PMP 49400 provides up to 20 Mbps of useable throughput in a 10 MHz channel. OFDM technology enables near line of sight connectivity for difficult to reach locations.

• Frequency range 4940-4990 MHz
• Channel width 10 MHz
• Typical LOS Range up to 24 km at lowest modulation

Cambium PMP 430

The PMP 430 with OFDM technology delivers 40+ Mbps throughput, ranges up to 30 miles (48 km) and near-line of sight (nLOS) performance for reliable and secure data, voice and video connectivity.

With low one-way latency of less than 3.5 msec the PMP 430 is ideal for sensitive voice and video services. SMs can be upgraded from 4 Mbps throughput to 40 Mbps via a software key system to meet customers' growing need for bandwidth.

PMP 54430 Access Point & Subscriber Module (5.4 GHz)

• Frequency range 5470 - 5725 MHz
• Channel width 5 MHz, 10 MHz or 20 MHz
• GPS Synchronization
• Up to 200 subscribers per sector
  

PMP 58430 Access Point & Subscriber Module (5.8 GHz)

• Frequency range 5725-5875 MHz
• Channel width 5 MHz, 10 MHz or 20 MHz
• Throughputs of 4, 10, 20 or 40 Mbps and can be upgraded through fixed software license
  

Cambium PMP 58450 Access Point

Providing more than 90 Mbps throughput, PMP 58450 can interoperate with PMP 430 series and PMP 100 Series Subscriber Modules.

Service providers with an installed base of 100 series SMs can now add new high-throughput PMP 450 series SMs to the network for business and residential access networks to enhance overall capacity, allowing more users and/or higher rate plans.

• Simultaneously talks to both FSK & OFDM SMs using Canopy MAC protocol
• OFDM MIMO data rates of up to 90 Mbps peak throughput
• No wholesale change-out of SMs required to achieve benefits